Jaw crusher is a kind of coarse crushing equipment commonly used in the mining industry. It is mainly used in the first crushing operation of the production line to crush large pieces of material, and then enter other crushers to complete the crushing operation. It is used in the crushing of various ores and bulk materials in mining and smelting, building materials, highways, railways, water conservancy and chemical industries.

The jaw crusher is an important member of the mine crusher production line, and it is the core equipment in the entire production line. It controls the development of the entire production line, so how can the jaw crusher be an indispensable in the stone production line? Does equipment play an important role and create greater value?


 

The jaw crusher occupies an important position in the stone production line. If you want to make the jaw crusher work better, you should avoid the following abnormal situations during operation and use, so as not to damage the machine and extend its service life.

First of all, we must maintain the equipment regularly. In the process of using the jaw crusher, due to the serious cost of the machine, the screws of the internal parts of the machine or the screws that fix the machine are often loose. This requires regular tightening of the screws of the machine.

Secondly, it is necessary to change the engine oil regularly. After the machine is used for a period of time, the internal lubricant will reduce the lubrication effect, and the debris dropped during the operation of the machine will be deposited in the lubricant, which will also increase the wear of the machine. Therefore, when the lubricant is used for a period of time, it must be replaced in time. After replacement, please use kerosene to clean the inside thoroughly to avoid residue. In this way, the machine is not easy to wear.

Third, the internal temperature of the machine is too high. The jaw crusher generates a lot of heat due to friction during use. If the heat cannot be dissipated in time and heat is accumulated in the machine, the machine will be damaged. For example, the central shaft of the machine can be deformed due to high temperatures, and it can be damaged when crushed. Therefore, when using the crusher, you must always pay attention to the internal temperature. If the temperature of the machine is too high, please stop working in time and use it when the temperature drops.

Fourth, first pick out the iron block when adding raw materials. If there are iron blocks in the raw material, the jaws of the jaw crusher will be damaged, making the machine unusable.

Fifth, if the particle size of the added material is not uniform. When too much raw material enters the machine, it will be damaged due to overload.